Flirt4Free is one of the longest-running cam platforms, online since the 1990s. It officially supports external broadcasting through an External Broadcast Form — free SplitCam sends the stream while the form sets your resolution and bitrate.
SplitCam is free live-streaming software for Windows and macOS. Download it and run the installer — no signup, no card, no watermark, no time limit. It is the encoder that sends your video to Flirt4Free.
Add your webcam, overlays and filters in SplitCam.
In the Flirt4Free model area, open the External Broadcast Form. Unlike most cam sites, Flirt4Free gives you an RTMP URL and a Stream Name (not a "key"), plus resolution and bitrate fields you fill in on the form itself. Copy the URL and Stream Name into SplitCam's server and key fields.
From the External Broadcast Form, copy the RTMP URL and the Stream Name into SplitCam's server and key fields, and set the same resolution and bitrate on the form as in SplitCam.
Press Go Live in SplitCam, then start your show from the Flirt4Free model area.
Flirt4Free labels the credential a Stream Name. Paste it into SplitCam's stream-key field — it serves the same role.
Flirt4Free's External Broadcast Form has its own resolution and bitrate fields — match them to your SplitCam settings so the picture isn't rescaled.
Flirt4Free has run since the 1990s — its model tools are mature and the External Broadcast Form is a documented part of them.
Flirt4Free's External Broadcast Form fixes your resolution and bitrate — a wired link keeps the stream matching those values without Wi-Fi dips.
Almost always the bitrate is higher than your upload can sustain. Run SplitCam's built-in speed test, then set the bitrate to about 75% of your measured upload — 3,500–6,000 Kbps for 1080p, lower for 720p. The lag clears once the encoder stops outrunning your connection.
Dropped frames mean packets aren't reaching Flirt4Free in time — usually unstable Wi-Fi. Switch to a wired Ethernet connection, close bandwidth-heavy apps, and lower the bitrate a notch. One spike is fine; a steady climb means the connection can't keep up.
Your camera isn't selected as the active source in SplitCam, or another app is holding it. Close Zoom, Skype or OBS, pick your webcam again in SplitCam's source list, and confirm the preview shows your feed before you press Go Live.
Re-copy the stream key — a trailing space or an old, rotated key is the usual cause. Confirm the server URL matches the one Flirt4Free shows and that external-encoder broadcasting is enabled on your account. A green slider in SplitCam's Stream Settings confirms a valid key.
Pick SplitCam as both the camera and the microphone, and select your real mic inside SplitCam's audio source. If audio drifts behind the video, lower the resolution one step — the encoder is overloaded and the audio is waiting on late frames.
Yes — officially, through its External Broadcast Form, which provides an RTMP URL and Stream Name. SplitCam works as the encoder.
From the External Broadcast Form in the model area — it shows the RTMP URL, the Stream Name and resolution/bitrate fields.
Yes — free, no watermark, no time limit, which suits a long-established platform like Flirt4Free where shows can run long.
3,500–6,000 Kbps at 1080p — set the same value in the External Broadcast Form and in SplitCam.
Earnings on Flirt4Free depend on audience size, hours streamed and tipping behaviour. Active broadcasters typically take home $200–$3,000 per month; top performers reach $10,000+. Your revenue share follows Flirt4Free's commission structure — check the model agreement before going live.
Flirt4Free requires age and ID verification before payout, which protects models from fraud. Use a stage name, never share personal data on camera, enable geo-blocks to hide your stream from your home region, and treat every viewer request as transactional. SplitCam's overlays and AI background can also hide or replace your real surroundings.
Flirt4Free typically requires a government-issued photo ID (passport, driver's license or ID card), a selfie holding the ID, and a tax/payout form (W-9 for US, W-8BEN for non-US). Approval usually takes 24–72 hours; once approved you can go live the same day.
Flirt4Free usually offers a mobile broadcaster app or a mobile-web broadcaster, but the experience is limited — no overlays, no second camera, no AI background. For full production quality, broadcast from a computer with SplitCam and use your phone as a second camera (SplitCam accepts IP-camera input from phones).
Yes — Flirt4Free provides an RTMP server URL and a stream key in the broadcaster panel. Paste both into SplitCam's Stream Settings → Custom RTMP, set 1920×1080 at 30 fps with a 4,000–5,000 Kbps bitrate, and click Go Live. The Custom RTMP route gives you full SplitCam scene composition (multi-camera, overlays, filters).
We are an independent guide. For account, payment or technical issues contact the platform's official support directly.
Free software. No watermark, no signup. Set up once, go live in one click.
⬇ Download SplitCam
